Chapter2 First Glance Of Visual Slam

Chapter 2. First Glance of Visual SLAM

1. What is Visual SLAM?

Using cameras to solve the localization and mapping problems.

2. Classic Visual SLAM Framework

A typical visual SLAM work-flow includes the following steps:

2.1 Sensor data acquisition

Acquisition and preprocessing for camera images. For mobile robot, this will also include the acquisition and synchronization with motor encoders, IMU sensors, etc.

2.2 Visual Odometry (VO) (Front End)

Estimate the camera movement between adjacent frames (ego-motion), as well as to generate a rough local map.

2.3 Back End Filters / Optimization

The back end receives camera poses at different time stamps from VO, as well as results from loop closing, and apply optimization to generate a fully optimized trajectory and map.

2.4 Loop Closing

Determine whether the robot has returned to its previous position in order tor reduce the accumulated drift. If a loop is detected, it will provide information to the back end for further optimization.

2.5 Reconstruction

Construct a task specific map based on the estimated camera trajectory.

3. Mathematical Formulation of SLAM Problems

3.1 Motion Equation

\[x_k = f(x_{k-1}, u_k, w_k)\]

where \(u_k\) is the input orders, and \(w_k\) is noise.

3.2 Observation Equation

\[z_{k, j} = h(y_j, x_k, v_{k,j})\]

where \(y_j\) is the landmark, \(x_k\) is the robot’s position, \(v_{k,j}\) is the observation noise.